Installation Requirements

This guide will walk you through the requirements for successfully installing Onboard's Edge software on your building's IP network.

🗄️ Virtualization Requirements

Onboard's software is compatible with VMware version 14 or later (ESX 6.7 compatible)

🖥️ Hardware Requirements

This is the machine where Onboard’s Edge Software will run. It is typically managed by your building’s IT/OT department. If not, you can use an external device like a mini PC, or even a raspberry-pi.

Minimum Hardware Requirements‍

These are the minimum specs required to run Onboard’s Edge Software reliably:

• 10GB Storage
• 2GB Memory
• 1 CPU Core
• 2 Ethernet network connection ports if using an external hardware

Recommended Devices

Here are the recommended specifications to ensure smooth performance and compatibility.

• Intel NUC Kit
• ASUS NUC 14 Essential
• Dell OptiPlex 3070 Micro
• Lenovo ThinkCentre M900 Tiny Desktop
• HP EliteDesk 800 G4 Mini
• GEEKOM Mini PC

💬 Need help verifying if your hardware is compatible? Ask us in the Online Community

‍

⚠️ Important:

• Ensure BIOS is configured for “Always On” mode so the device powers on automatically after outages.
• Physically label or sticker the device: “Do Not Unplug” to avoid accidental downtime.